NEWTON SYSTEM 500
DRAINAGE SYSTEMS
Newton System 500
is a Type C cavity drain membrane waterproofing system. Water
is controlled and collected by designed air spaces for the water to
depressurise into, ready for removal from the property. Cavity drain
membranes are not able to do this effectively and safely on their own
and so the drainage products are a very important part of Newton System
500.
Newton Basedrain
Newton Basedrain collects water directly from the cold joint
between wall and floor or at the kicker in a raft construction. Newton
Basedrain can be placed either in a formed or cut recess, or on top of
the floor within a spacer of 50mm to ensure that the floor membrane is
above the drainage conduit. This spacer can be either a closed cell
insulation, screed or concrete. Water collected by Basedrain is drained
to a Newton sump or a safe form of drainage. Basedrain has an up stand
that is placed against the wall membrane which has formed spacing lugs
that provide a small gap that will collect condensation from the face of
the membrane should this occur. Basedrain Corner Pieces are available
for internal and external corners. Basedrain is fully maintainable via
access points included in the installation.
Click here to view the full product details
for Newton Basedrain on www.newton-membranes.co.uk
Newton Floordrain
Newton Floordrain is similar to Newton Basedrain but does not
have the up stand and the spacing lugs. Floordrain
should be placed above construction joints to the floor to collect water
ingress at this weak point in the structure.
Floordrain is connected to the Basedrain outer ring with Newton
Basedrain T Pieces.
Click here to view the full product details
for Newton Floordrain on www.newton-membranes.co.uk
Newton Baseboard
Newton Baseborad is an above slab drainage conduit that is used where
build constraints prevent the use of Basedrain at the wall/floor
junction, for example where the structural raft or slab cannot be cut to
make a recess, or where headroomis too tight for the Basedrain to be
placed on top of the slab within the 50mm spacer. Generally used as a
remedial drainage system, Baseboard has been successfully used many
times as a drainage conduit at the abutment of non-ground bearing slabs
forming floors within deep basements.
Click here to view the full product details
for Newton Baseboard on www.newton-membranes.co.uk
Case
studies on numerous successful projects and full product details are
available at
www.newton-membranes.co.uk
Download Newton System 500 Brochure
